Re: circuit board repair
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: circuit board repair



[AD removed for archives]
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a 
FREE Cutlery Set + Cutting Board!
caacBBEb7yoMza/OmahaSteaks
-------------------------------------------------------------------

It's possible but the question is, if your gauges are working, where is the
limiter getting its ground? You can repair it by roughing up the copper with
a scotchbrite pad and then putting the solder to it, but it's not the most
reliable fix. You'd be better off finding a replacement circuit board.

Dave Casey

----- Original Message ----- 
From: "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, September 06, 2004 10:24 PM
Subject: circuit board repair


> [AD removed for archives]
> -------------------------------------------------------------------
> Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
> FREE Cutlery Set + Cutting Board!
> caacBBEbUYx2xa/OmahaSteaks
> -------------------------------------------------------------------
>
>   Whats the proper way to repair a break in your printed circuit board?
>    Will a drop of solder bridging the gap do it?
>     This might have been my problem with my wipers, i dont know, i tore
>     out the dash gauge panel and found a break in the printed circuit
>     that was basically preventing the voltage limiter( ?????  A LITTLE
>     SILVER BOX WITH 3 PRONGS THAT PLUGS IN THE CIRCUIT BOARD ) from
>     finding ground.
>      Could that be whats making my alt gauge dance and my wiper switch
>      breaker click?
>     Geez I hope i found the problem
>    Neal Zimmerman, Eugene Oregon
>
> [AD removed for archives]
> -------------------------------------------------------------------
> Amazing Diet Patch
> The fastest - Easiest way to lose weight! Try it now FREE!
> caacBBBbUYx2xf/MyDietPatches
> -------------------------------------------------------------------
>
> ----
> Please address private mail -- mail of interest to only one person -- 
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>

[AD removed for archives]
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
caacBBBb7yoMzf/MyDietPatches
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz. 










Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.