Butch, in my view you should place a call to MP. Sure, there’s a ton of data out there regarding what master cylinder(s) to use when you’ve swapped later model front disc brakes onto our cars, but given you’ve installed an aftermarket kit – particularly the rear disc brake setup – they would have the best knowledge to spec a master cylinder. For example, when I added the Strange rear disc brakes to my Fury they were very specific about the master cylinder piston bore required for proper braking. Jim From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> On Behalf Of Butch I'll check out the article. I have the MP conversion kit. Thanks! On Tuesday, March 15, 2022 at 5:52:44 PM UTC-7 62-65-mail...@xxxxxxxxxxx wrote:
-- -- -- Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks! 1962 to 1965 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. -- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. http://groups.google.com/group/1962to1965mopars?hl=en. --- You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/007601d83943%24ed4dca80%24c7e95f80%24%40att.net. |
Back to the Home of the Forward Look Network