Re: 318 poly tuning/timing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 318 poly tuning/timing



THE WAY I DO IT IS RUN THE ENGINE AT 1500 TO 2000 RPM ANDTWEET THE DIST BACK FORTH TILL I GET THE BEST SOUND AND SMOOTHEST RUNNING.  TIGHT DOWN  AND DRIVE

On Thu, May 5, 2022 at 6:55 AM neal zimmerman <neal.zimmerman@xxxxxxxxx> wrote:
Hi all. Anybody know the idle rpm spec for a 1965 poly 318 with automatic tranny? I have looked all through my manual and queried it on  the internet but can't seem to find it.
     My manual says timing for the automatic should be at 10 BTDC. Is that with  vacuum advance   hose disconnected and plugged?
   Thanks 
   Neal

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CANQhizRxCAT%2BLKt3XOhsVLx9EBDP-Cw7KG%2B6Exqx0oWq2XO6fQ%40mail.gmail.com.


--
Gwwilson

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CAM_Vd%2BDo77aPaC2h3nsCKD6cDaSAAUqX-9gBKucwnDE9Utxa2Q%40mail.gmail.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.