If you get a chance or opportunity to talk with a person who has done this conversion or owns an AWB that may help.
Keep us posted on your project please.
Thanks,
Gary H.
> -------Original Message-------
>
> Well Michael here on the list replied that Coronet front tread width
> was 59.5. And online I did find A100 Front tread width at 60.83. So
> the wheels would move out slightly less than 1/2 inch per side,
> which would probably work. But the A100 axle has a dedicated spot for
> spring mounts, so unless that matches the coronet front frame rail
> width youre out of luck. But I know this was what they used back in
> the day, so there must be a way to do it.
> Neal Ziummerman
> PS oh yeah and then there's the whole steering gear/geometry
> nightmare too. The A100 had a sideways steering box, the pittman arm
> came out the side.
>
> On Mon, Apr 29, 2024 at 3:23 PM 62-65-mail-list-club-Gary-H
> wrote:
>
> > Okay so you found the track/tread width of the A100. Good.
> >
> > Did you ever find the track width of the 1965 Coronet? Also,
> > would a measurement between the lower ball joint grease fittings
> > help, if you did not find that?
> >
> > Thanks,
> > Gary H.
> >
> >> -------Original Message-------
> >> From: neal zimmerman
> >>
> >> I just found the track/tread width of the A100. 60.83 inches.
> > That's
> >> almost a full inch wider than the b-bodies, which might work.
> > Then
> >> there's also the spacing on the leaf springs to think about.
> >> Neal
> >>
> >> On Sun, Apr 28, 2024 at 9:52 AM 62-65-mail-list-club-Gary-H
> >> < > wrote:
> >>
> >> > A few more thoughts:
> >> >
> >> > * Do you have the booklet "Authenticity Guide -- 1965 Dodge
> > and
> >> > Plymouth Hemi Super Stocks" by Jim Schild? But I think it is
> >> > currently out of print and no longer available. I may have a
> > copy of
> >> > it but can't lay my hands on it right now. Here is an old page
> > that
> >> > described the booklet.
> >> >
> >> > https://www.ornocar.com/schild_autoreview1965.html
> >> >
> >> > * There is also a technical report that was put out by
> > Chrysler
> >> > about building the AFX B-body cars.
> >> >
> >> >
> >>
> >
> https://web.archive.org/web/20160912055159/http://www.moparmax.com/features/2006/images/05-report/report.pdf
> >> >
> >> > * Lastly, a man named Gary Gerard hosts an old website called
> >> > afxer.com that has his email and phone number listed on in
> > case you
> >> > want to ask him about the tracking width here:
> >> > http://www.afxer.com/documents/74.html
> >> >
> >> > That website also lists for "contact" Bill Atwood and others
> > (like
> >> > Steve Magnante) on
> >> > http://www.afxer.com/documents/34.html I don't know if those
> >> > "contact" emails still work though.
> >> >
> >> > By the way, there is also a fun story about a 1965 Dodge
> > called
> >> > "Tension" on that afxer site:
> >> >
> >> > http://www.afxer.com/documents/mag_s_corner_continued.html
> >> >
> >> > Thanks,
> >> > Gary H.
> >> >
> >> >> On Thu, Apr 25, 2024 at 10:07 PM neal zimmerman
> >> >> wrote:
> >> >>
> >> >> > Hi guys, been a while. It's warmed up and I ve been
> > wrenching.
> >> >> > I completely cut up and parted out a rotted out and bent up
> >> >> > Dodge A100 to help on my 65 A100 project. So before I have
> > the
> >> >> > carcass hauled away I want to pull out the straight axle
> > setup
> >> > and
> >> >> > leafs.
> >> >> > When they used these in the 62-65 B bodies was it a bolt in
> > or
> >> >> > not. I have been looking for the front track width of a 65
> >> > coronet
> >> >> > but cant find it anywhere.
> >> >> > Neal Zimmerman, Eugene Oregon
> >> >> > PS- Don't worry the A100 was beyond any kind of hope.
> >> >> >
> >> >
> >
> > --
> > --
> > --
> > Please address private email -- email of interest to only one
> > person -- directly to that person. That is, email your parts/car
> > transactions and negotiations, as well as other personal messages,
> > only to the intended recipient. Do not just press "reply" and send
> > your email to everyone using the general '62-'65 Clubhouse public
> > email address. This practice will protect your privacy, reduce the
> > total volume of mail and fine-tune the content signal to Mopar
> > topic. Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > --
> > You received this message because you are subscribed to the Google
> > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> > http://groups.google.com/group/1962to1965mopars?hl=en.
> > ---
> > You received this message because you are subscribed to the Google
> > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> > To unsubscribe from this group and stop receiving emails from it,
> > send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> > To view this discussion on the web visit
> >
> https://groups.google.com/d/msgid/1962to1965mopars/20240429222322.48086.qmail%40server309.com.
>
> --
> --
> --
> Please address private email -- email of interest to only one person
> -- directly to that person. That is, email your parts/car transactions
> and negotiations, as well as other personal messages, only to the
> intended recipient. Do not just press "reply" and send your email to
> everyone using the general '62-'65 Clubhouse public email address.
> This practice will protect your privacy, reduce the total volume of
> mail and fine-tune the content signal to Mopar topic. Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> --
> You received this message because you are subscribed to the Google
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
> ---
> You received this message because you are subscribed to the Google
> Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/1962to1965mopars/CANQhizT5p3VsYZQGgQm1WtfJ_bJg53WKpwPRdud9tmh4HVLJ0g%40mail.gmail.com.
>
--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/20240504172118.33932.qmail%40server309.com.