Trans and damper question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Trans and damper question



[AD removed for archives]
-------------------------------------------------------------------
Get both the PlayStation2 and Game Cube for Free! Click here to 
find out how.
caadeMkbOyW3Na/Consumer Research
-------------------------------------------------------------------


Well, I', getting ready for the spring round up swap meet in May and I  need 
some help identifying some parts to sell so I don't look like a complete  
idiot when someone asks what these things fit.
 
#1 is a pulley for a crank, but it has a damper cast in it. I have 4  pulley 
dampers, but this is the only one I've seen with a cast in damper.  
 
I also have 2 833 transmissions, one has about a 13" tail shaft with 2  
mounts for shifters, one near the front of the tail shaft and the other to the  
rear.  I think this came out of a 340 cuda.  The other has about  a 9" tail  
shaft with a shifter mount at the rear of the tail shaft.   I've been told this is 
for a big block A body, but I don't want to mislead  anyone.
 
  Also, one last question, what's the deal with the center dump  exhaust 
manifolds?  Seems everyone is looking for them.  Is this a  desired street rod 
item?   Thanks in advance.    Joe
 
  Any help appreciated     Joe

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Get a FREE* 5 Megapixel Digital Camera - yours to keep!
caadeMobOyW3Nf/5 Megapixel Digital Camera Promotion
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.