RE: 62 Polara/Dart cowl

["Gary H." <62to65mopar@xxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadeMjbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

Repro cowl driver's side patch panels are available from several 
vendors, (Kramer for example) not the whole cowl, afaik. Some people say 
the patch panel requires some tweaking to fit properly.

http://www.maxwedge.com/orangemonster.html gives some Max engine specs. 

My 2 cents: just build an engine that meets your performance 
requirements, rather than a "more streetable max wedge engine".
:) 

Keep us posted how the project is going. 

Gary H. 
  
Alex wrote:
> 
>  I'm trying to get as much of the things that I need for this spring to 
> start the restoration of my 62 Polara. Would anyone know who or where a 
> new cowl can be purchased? The one on the car seems to be loaded with 
> filler and some didn't do a good job of shaping it.
>   Also has anyone built a more streetable max wedge engine? I'm also 
> trying to find the orginial specs of the max wedge, if you know where 
> this can be found please let me know.    Thanks,  Alex

[AD removed for archives]
-------------------------------------------------------------------
Get a FREE* MP3 Player - yours to keep! Click Here Now!
caadeMpbOyW3Nf/MP3 Player Giveaway
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.