'64 Brake Rod
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'64 Brake Rod



[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadlVAbOyW3Na/ProductTestPanel
-------------------------------------------------------------------


I am installing my newly rebuilt power brake unit and am concerned about the 
tie in of the rod to the pedal. It has been about six months since I removed 
it and my memory is hazy (I don't remember what I had for breakfast either). I 
have the collared bolt and a nut, but there looks as though there should be 
some spacers or washers. Can anyone set me straight on this one?

Tom Faust

--
[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Is your PC running at 100%? Check your PC's health in 2 minutes!
caadlAsbOyW3Nf/PC Health Check
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.