RE: TTI - X pipe exhaust system install questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: TTI - X pipe exhaust system install questions



[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadlVAbOyW3Na/ProductTestPanel
-------------------------------------------------------------------


Houston,
I've been following these installation discussions with interest. Last 
year I purchased the TTI Poly headers, 3" X pipe exhaust, with SpinTech 
mufflers. Everything is still in the box waiting to be installed. Today 
I pulled out the elbow fittings to see the difference. 
They are marked for left and right sides with these numbers.

B30X625L and B30X625R, both measure 11" in length. The difference I 
found was that the left elbow was bent in a tighter radius by 1/4". The 
left elbow had a height of 9", and the right elbow measured 9 1/4". 

Just for the record, my TTI system came with the Part # XB30HN6365. I 
was waiting for my new motor before installing this exhaust, but I may 
just pick a mini starter and get this task done now with the motor thats 
in the car now that I'll be crusing with all summer.

Tom D. is only about 2 hrs. away in Providence, maybe we can work this 
one out together.

Nick Tiberio
63 Fury





HoustonDB@xxxxxxx wrote:
> 
> 
> Has anyone installed the TTI - X pipe system on their early B Body?   
> I'm 
> trying to install mine and just can't seem to get started.  I can't  
> quite figure 
> out where the tailpipe mounts are supposed to go.  I think the  
> collectors 
> need to be cut down a little but not sure.  And I need to  confirm that 
> the 
> pipes go under the emergency brake cable and not  between the cable and 
> the 
> floorpan.  It's all just very confusing at the  moment.  The directions 
> are very 
> vague and the company website is no help  at all.
>  
> If anyone has some pictures they could email, or some tips they could 
> pass  
> along, I would appreciate it.
>  
> Thanks,
> Houston
> '64 Belvedere
> 
> [Non-text portions of this message have been removed]
> 

[AD removed for archives]
-------------------------------------------------------------------
Personals at Meeting Friends Online.
Find your perfect partner...We?re here to help. 
Click below to register for FREE and start connecting!
caadmZ5bOyW3Nf/MeetingFriendsOnline
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.