Re: Rear gears
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Rear gears



[AD removed for archives]
-------------------------------------------------------------------
Buy Stocks and Index Funds for just $4 No Account or Investment Minimums and No Inactivity Fees Automatically invest weekly or monthly and build your future.
caadlVFbOyW3Na/Sharebuilder
-------------------------------------------------------------------


The ring and pinion set are specific to the case. That is, you can't use a 489 pinion in a 742 case, etc. The carriers (part the ring gear bolts to) will swap between all three cases, provided you use carrier bearings for the original case. Example: You have a clutch type Sure Grip carrier from a 742 with a badly pitted gear, and you have a 489 one wheel peel with a good gear. You can put the 489 ring gear on the sure grip, and install them in the 489 case, but when doing so you must use the carrier bearings from the 742 case (or new replacements of the same type).
Similarly, if oyu go buy an Auburn sure grip to put in your 742, you need the 489 carrier bearings.


Dave Casey

----- Original Message ----- From: <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, April 27, 2005 10:11 AM
Subject: Rear gears



[AD removed for archives] ------------------------------------------------------------------- Buy Stocks and Index Funds for just $4 No Account or Investment Minimums and No Inactivity Fees Automatically invest weekly or monthly and build your future. caadlVFbUYx2xa/Sharebuilder -------------------------------------------------------------------

I just swapped the 3:23 suregrip into my Polara this weekend and it made
me wonder if all 8.75 gears are interchangable? I put a 489 chunk into
my 741 case and it went right in. The open rear I took out also had 3:23
gears. I'd like to put in a set of 3:73's. If anyone is interested in a
swap, let me know. Having a lift made it soooooo much easier. I had a
hard time getting the chunk out as the rear came out of a car that sat
in a junkyard for 25 years. I never would have gotten in out rolling
around on the floor!

Jeff Adams
64 Polara

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay! Click now!
caaa9eYbUYx2xf/TopOffers
==========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

==========================================================
Extra! Extra! Read all about it! Get the latest weather,
sports, and lifestyle news you can't afford to miss, all
at a price you can afford to pay!  Click now!
caaa9eYbOyW3Nf/TopOffers
==========================================================
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


bOyW3N.







Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.