383hp no guts

[C Singleton <csingleton@xxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Na/PC PowerScan
-------------------------------------------------------------------

finally finished installing 68 383hp motor in my 65 belv conv.  problem is
the car is a dog off the line, wont even break the tire loose (no posi yet).
when i punch it down off the line it just seems to bog.  same thing if i
punch it down at highway speed, bog then really wakes up after the rpms come
up. i have a rebuilt carter avs, tried adjusting the secondary air door too,
resto cam, and 2.76 gears (i know the gearing is hurting me).  timing is at
38 btdc.  the other problem is the idle has to be set high because when i
put it in gear it looses so many rpm it nearly stalls.  is there something
wrong with my tranny?  it was just rebuilt too, torque converter is the same
one from my poly 318.  any help would be appreciated, at my wits end.    thx
colin

[AD removed for archives]
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now! 
No Credit Checks, Easy & Fast Approval 
Cash in you account Overnight!
caadOurbOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.