Re: Hedman shorty headers

[C Singleton <csingleton@xxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadVJEbOyW3Na/PC PowerScan
-------------------------------------------------------------------

i used the full length hedmans, you have to get the car about 2 feet off the
ground to get them on, and changing the plugs is not easy.  already have a
blown header gasket which will require jacking up the motor a couple inches.
big pain in the neck.  and man do they put out a lot of heat in the engine
compartment.  if a had to do it over, i would go with the factory hipo cast
iron manifolds, although i heard that requires some extra pipe bending.  -
Original Message -----
From: "Sean B" <polecat2@xxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, September 17, 2005 7:59 PM
Subject: RE: Hedman shorty headers


[AD removed for archives]
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now!
No Credit Checks, Easy & Fast Approval
Cash in you account Overnight!
caadVJ4bP01Fga/911PaydayAdvance
-------------------------------------------------------------------

Yes, a 1964 B body Fury.  I've seen these Hedmans listed where they say
they will fit, and other places where they say they won't.
What did you end up using?

Sean

C Singleton wrote:
>
> are you trying to put a set of shortys on a early bbody.  i bought a set
> for
> my 65, didnt come close to fitting, also collector is only 2inches.

[AD removed for archives]
-------------------------------------------------------------------
Get $1000.00 Overnight! Fast and Easy!
No Credit Checks! Many Lenders are 100% Paperless!
Let The Wizard Find the right Lender for you!
caadVJ5bP01Fgf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Get up to $1500.00 Fast and Easy!
No Credit Checks! No Paper Hassles! Nothing To Fax!
Apply Online and We'll Contact You Within the Hour!
caadVJ0bOyW3Nf/911PaydayAdvance
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.