Re: Centerforce Clutch?

[Joeydahook9@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Oprah vs Dr. Phil- who is your favorite? Vote now.
caad6r9bOyW3Na/Your opinion
-------------------------------------------------------------------


The Centerforce II might be a little overkill for a street car. They  can be 
brutal in traffic. They're good, though.  The Mcleod is  probably easier 
around town.  Their 200 series disc is the middle of the  road model for both 
street/strip duty.  Mopar makes a decent 10 1/2" street  strip disc #P4876911 too 
and it's about 50.00 cheaper than the Mcleod.   However the Mopar pressure 
plate is about 50.00 more.  Their street/strip  pressure plate is #P4876920.  
Either brand will run you somewhere around  350 not counting the throw out 
bearing.  I have used a Brute Force 11" I  got from NAPA that locked up great, but 
the pedal pressure was out of  site. My brother's Centerforce II on his 440 has 
the same problem.  I  thought it was a Mopar thing until I drove a Mcleod.   
Joe

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Frustrated by your Technology? Can't get it to work properly?
Get HiWired! 45 min over phone, problem solved. Learn More.
caad3QXbOyW3Nf/LightFrog
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.