RE: fan belt emergency--part 2
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: fan belt emergency--part 2



[AD removed for archives]
-------------------------------------------------------------------
New Apple® iPod® nano. As Thin as a No. 2 Pencil. Stores up to 3 
Days of Songs! Get it Here FREE*!
caad3PYbOyW3Na/Superb Rewards 
-------------------------------------------------------------------

Thanks Rich. On the new idler pulley, it rides on a new bearing that is 
part of the pulley, so I think that angle is covered. The pulleys are 
pretty close in alignment, and it didn't break with the same alignment 
3000 miles ago, so I'm left with the water pump.
Richard Kinsley wrote:
> 
> 
> laborboy@xxxxxxxxxxxxx wrote:
> > 
> > Thank you for all the suggestions. Here are some further clues. Please 
> > help me troubleshoot this:
> > 
> > 1. Checked alignment. Maybe 1-16th to 1-8th off. Don't think this is the 
> > 
> > 
> > problem because I drove 5000 miles with the same alignment before this 
> > started happening.
> > 
> > 2. Noticed some intermittent underhood whine noise around the time this 
> > started happening.
> --------------------------------------------------------------------
> 
> I gotta think the noise is indicating the belt slipping as in one of the 
> 
> pulleys hanging up or at least causing much resistance aka heat. The 
> waterpump has to be a prime suspect. When you replaced the idler was 
> there a new shaft that came with it or does it reside on an existing 
> shaft? Could be this gets hot and swells causing the friction there. At 
> least I'm sure it's not the muffler:)
> 
> Rich Kinsley  '64 Polara 4 door

[AD removed for archives]
-------------------------------------------------------------------
Technology Made Easy so you can Enjoy Your Technology!
Help with PCs, iPods, network & much more. Industry Leader.
caad3QVbOyW3Nf/LightFrog
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.