RE: Clock repair questions

[ledman_70@xxxxxxxxxxx]

Good point Harold...I just built a voltage limiter for the dash in my 
Polara with a 5 volt regulator I got at Radio Shack, so I'll bet you 
could even step that down to 1.5 volts. Anybody ever tried it?
Jeff
Harold (Dooner) Funderburk wrote:
> 
> Gary,
> If someone did the AA batt clock, maybe they could get
> something from the electronics store to reduce the
> 12-14 vdc down to the 1.5 vdc that the batt puts out.
> Then no changing the batt anymore.
> Just a thought. I don't know enough about electronics
> to know if it is possible or not.
> 
> 
> Harold (Dooner) Funderburk



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

bSONJP. 
Or send an email to: 1962to1965mopars-unsubscribe@