Re: lost post
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: lost post




Bob,

part number 2070742, is 1959-68 BCD body, 8 3/4" rearend, 1 3/4" pinion 
shaft( large diameter), w/ 10 studs holding the pumkin, which comes out the front.

If it has a nut and keyway on the axle ends, it's a rear from 1957-64.

Hope this helps.

Rich StLouisMo
64 MaxWedgeSavoy

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.