First welder advice?

[Jim Altemose <jaltemoose@xxxxxxxxx>]

I'm starting to think about buying my first welder.  Any wise words
for this rookie?  My goal is to be able to weld patch panels on my
car, but also be able to weld tubing such as for a rotisserie and roll
bars.  From what I've read, TIG seams most flexible and controllable,
MIG is cheaper and faster.  I see a lot on Ebay that simply say Arc
welder.  What does that imply?  I was looking at the Miller Maxstar
150 STL, but I guess you'd need A/C for aluminum?  That might be nice.
Thanks for any advice.  I've poked around the Lincoln site, but most
of the information is way over my head.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge), '65 Belvedere I (Street Wedge), '71 Bronco


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=