Re: gear box
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gear box




Thanks I will try that
Butch
----- Original Message ----- From: "Jimmy Peavy" <peaver63@xxxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, November 06, 2007 4:54 PM
Subject: Re: gear box



Park it, straighten the front wheels, remove the shaft from the steering gearbox, and put it back on , centered,

  Jimmy

harry skalla wrote:


Clear DayHi all, ok, I did something wrong. I replaced my steering box, and thought I had my steering wheel aligned, but when I tightened it all up and took it for a drive ...opps! steering wheel was not straight. Is there a trick or a certain way do hook it all back up so that the steering wheel is straight? Any ideas thanks.....
Butch



----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:






----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.