poly question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

poly question




Someone asked me about the pistons and deck height on the poly build (360 crank in 318 poly block) my friend Wager was doing as i watched over his shoulder. He picked most of the parts hisself and seemed to have it figiured out so you may have been surpised that i didnt know of the top of my head but i am encouraging folks who i used to do work for to become more independant since i wont be around forever and i want to play a bit myself on my senor Dagster project (1962 Slant six ). 
The Piston he  choose was a Silvolite 1268  and he measured deck height with the 360 crank machined and installed in the early 318 block at .007". He used compression distand comparisions form the stock piston to the new one and cacluatated what his deck hieghgt should be. he must have been payning attention because it worked out perfect. 

Don
Author of
Return to Deutschland (True Adventure)
Old Reliable (Mopar)
http://altonapublicschool.faithweb.com/

http://seniordragster.bravehost.com/index.html
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.