RE: Short Fibre Grease

[Dave Walters <whdavid@xxxxxxxxx>]

Brian Schlump wrote:
> 
> The FSM states that the pilot bushing for the clutch (transmission input 
> 
> shaft)is lubricated by putting 1/2 teaspoon of short fibre grease in the 
> 
> pocket of the flywheel just ahead of the pilot bushing.  I don't have 
> any of this type of grease.   Are there any other types of grease that 
> you guys have used successfully for this application?
> Brian
> 
> '64 Belvedere
> Davenport, Iowa
> 
> "The difference between ordinary and extraordinary is that little 
> extra."

Brian,

Why not use the pilot BEARING instead? They're only $8 everywhere.Much 
easier to remove too.

  Dave Walters
  Denver, Co.

  


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.