Re: 64 Big Block Oil Pan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 64 Big Block Oil Pan




There are detailed photos of the oil pans in the 62-65 Tech Archives if you have any doubt about the pans authenticity.

   Akron Don

Don Owen wrote:

Merry Xmas Fellas:
I'm restoring a fairly tired oil pan for my 64 426 Street Wedge Belvedere.
Its got some dents here and there, for sure.
However, there is a "Dent" in the front, right (passenger) corner of the center sump (deep section) of the
oil pan which looks to be a factory made depression. Is this typical and correct?
The pan looks to be right in all other respects, as it has the two "bulges" in the front and rear shallow sections.
Thanks for any help,
Donny, 64 Belvedere


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.