Rick, I'm not sure if I'm right, but I know the connectors on these newer starters don't work but aren't these just extensions? These connectors hit the block on my 440, but they unbolted from the starter and, underneath were another set of connectors that worked out fine. In other words, the connector was nothing more than a connector adapter bolted to the main connector, if that makes sense. Is this what you are referring to, or is there something else? Thanks, Sean RCoronetfreak@xxxxxxx wrote: > > > Make sure it is for a '95 and back Magnum motor...Magnums started in '92 > or so. May be more applications dating further back, but '96 and up > have a different connection and you would need to get a little jumper > harness for, that used to be available from Chrysler. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.