Re: Disc Brake Swap again

[Bill <Y1TopBanana73@xxxxxxxxx>]

Nope...didn't think to get the prop valve, but I probably still can if
I have to. I was so happy to get the whole setup for free that I
wasn't thinking about it! If not, aren't these things available now?

Bill M
65 Coronet 500 'vert

On Mon, Apr 28, 2008 at 12:17 AM,  <chymar01@xxxxxxxxxxx> wrote:
>
>  that setup will work just fine. the spindles are the same as the FMJ stuff.  probably has pin calipers instead of sliders. They're better. control arms don't matter as you will use your originals. did you get the proportioning valve?
>
>  Mark
>
>
>   -------------- Original message ----------------------
>  From: Bill <Y1TopBanana73@xxxxxxxxx>
>  > I managed to come up with a 73 B-Body complete disc front suspension
>  > set for free. Since pretty much any other car body spindles seem to
>  > swap in to pre 66 B-Bodies, is there any reason to believe that this
>  > setup would be any different? The car has the rubber isolated
>  > suspension like the F,M,J bodies, but the control arms and calipers
>  > look totally different than I've ever seen before. I'm thinking this
>  > WILL work, but just looking for some re-assurance before I start
>  > tearing into stuff.
>  >
>  > Thanks
>  >
>  > Bill M
>  > 65 Coronet 500 'vert