RE: Hub nut size '62 C-body 12" brakes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Hub nut size '62 C-body 12" brakes




Just measure the distance from an external flat to the flat directly 
oppsite it. If you can't do that, using an adjustable wrench, tighten 
the wrench until it is tight against the nut. Pull it off and measure 
the inner dimension between the jaws of the wrench. That is the socket 
size.

I hope that helps.

Bob in Sacramento


David Kincaid wrote:
> 
> 
> I need to remove the hubs on a '62 Chrysler 300.  Can someone please 
> tell me what size socket I need to remove the nut that holds the brake 
> hub on?  If it's a different size for '63 please let me know that too.  
> Thanks.
> 
> Dave
> 
> _________________________________________________________________
> Windows Live SkyDrive lets you share files with faraway friends.
> http://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refresh_skydrive_052008
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.