Re: 273 cam question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 273 cam question




In '68-'69 , the 273 had hydraulics...basically used LA318 valve gear. Before that, they were all solids, 2bbl and 4bbl.

Darwin/Victoria BC/Canada
'65 Cdn.Val.Custom 100 'vert
225/factory A833....eternal project
'67 Dart GT 'vert...
273/904...now with "Collector" status
http://s41.photobucket.com/albums/e285/65val/


----- Original Message ----- From: <chymar01@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, August 17, 2008 11:22 AM
Subject: Re: 273 cam question




I thought all 273's had solid lifter cams? I've never seen one that didn't.

mark

-------------- Original message ----------------------
From: moparbikeguy@xxxxxxx


There is probably more interest in slant 6's than in 273's, but hopefully Don or someone else can recommend a cam for my mini V8. The engine is a completely stock 1967 273 2bbl. It has been fitted with a Holley street dominator and a 600 vacuum secondary carb. It retains the stock 8.8 compression ratio, exhaust manifolds, 904 trans and has 4.10 gears with 28" tires. I just want to upgrade the hydraulic cam for racing at the local dragstrip, and very limited street
driving. I'd like to keep the hydraulics and not go solid.


'65 Coronet 500 stroker

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume
of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.