Re: A833/727 yoke interchange
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A833/727 yoke interchange



The yokes are the same from the 727s to the 833s.  The 904 will not work.  
---- Jeff Adams <ledman_70@xxxxxxxxxxx> wrote: 
> 
> I know we've discussed before, but refresh my memory. Will the front 
> yoke from an A833 OD fit a '68 big block trans automatic?
> 
> Jeff Adams
> 64 Polara
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.