Re: valve cover baffles
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: valve cover baffles




Paul,
Thanks for throwing another curve into my build, buddy! LOL I was planning on using MT covers on my build & didn't even notice that they had no baffles! I'll be reading the posts on this topic, carefully, & will be most eager to learn how your baffles work out. I'm a steelworker and will be able to fab. baffles at work. Do you think that the gaps on each end are small enough to keep spray out of the valve?
Mike
 

--- On Tue, 8/19/08, Paul Lennemann <pjlenn@xxxxxxxxx> wrote:

> From: Paul Lennemann <pjlenn@xxxxxxxxx>
> Subject: valve cover baffles
> To: 1962to1965mopars@xxxxxxxxxx
> Received: Tuesday, August 19, 2008, 7:08 PM
> A few days ago I posted a question about valve cover baffles
> but didn't 
> get any responses.  So I'm going to try it again. 
> Here's the original 
> post:
> 
> I got my engine back from the machine shop at long last.
> Now to start
> putting the finishing touches on it. One of my first
> projects is to
> solve the problem of it puking oil out of the rear valve
> cover breather.
> My new Holley has a PCV port that I suppose I should use.
> So I'd like
> it not to be sucking oil into the carb.
> The M/T valve cover I'm using has threaded stand offs
> flanking each
> opening giving me a perfect place to anchor a baffle. So I
> made a
> template out of cardboard and will probably use some alum.
> sheet to fab
> the baffles. I'm thinking I should make the baffles fit
> tight to the
> sides with @ a 1/2" gap at either end. Could I use
> some RTV or
> something similar to seal along the edges where it meets
> the cover? The
> main reason being so that it doesn't sag and hit the
> rockers. There
> would only be about 1/4" clearance. Otherwise I
> suppose I could
> probably form a bead into it to make it a little more
> rigid. I know some
> of you have done this mod. What did you do?
> Here's some pictures to illustrate:
> 
> http://s204.photobucket.com/albums/bb1/63mopar/
> 
> Paul L.
> '63 Sport Fury
> 440/727
> http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      __________________________________________________________________
Get a sneak peak at messages with a handy reading pane with All new Yahoo! Mail: http://ca.promos.yahoo.com/newmail/overview2/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.