RE: Fury door panels

[62pluckedchicken@xxxxxxxxx]

I have the same problem with my door panels (crappy on the bottom) what 
I was planning on doing;

Paint the panels with SEM vinyl paint, find a contrasting color vinyl 
fabric for the bottom and hide the seam between the old vinyl and the 
new vinyl with flexchrome molding.

I'll take pics when I'm done


Jeff Adams wrote:
> 
> I HAVE been mulling that one over in my head. Thanks
> spigot2039@xxxxxxxxxxx wrote:
> > 
> > If you don't mind non-original, you can take what you have to a good car 
> > 
> > upholstery shop and they can figure out what to do with the bottom. For 
> > example, put in a carpet-like piece like used in the '63 Polara 500 or a 
> > 
> > matching piece of vinyl with a stitch or molding border. 2c
> > 
> > Gary H.
> > 
> > -----Original Message-----
> > 
> > >Sorry for the OT post, but I need a good set of front door panels for a 
> > >68 Sport Fury. I'd prefer metallic red, but can dye them if necessary. I 
> > >
> > >
> > >can't find them new anywhere and my old ones are ate up along the 
> > >bottom. Legenday and YearOne don't carry them. They have the seat 
> > >covers, but no door panels...anybody have any ideas? Thanks
> > >
> > >Jeff Adams
> > >64 Polara
> 
> 
> 
> Jeff Adams
> 64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.