RE: Brake Drum Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Brake Drum Question





Right, and I have had terrible luck at getting round brake drums, they are almost always warped and need replacement or extensive turning.  The last time I ordered some I gave up after 4 sets and just had them turned.

Mike in New Mexico






 

> To: 1962to1965mopars@xxxxxxxxxx
> From: bt6t4@xxxxxxxxx
> Subject: Re: Brake Drum Question
> Date: Wed, 1 Jul 2009 15:16:23 -0700
> 
> 
> Measure the inside width of your drum. It might be 2.5" and can accommodate 2" shoes. The spring is for vibration purposes only.
> George
> 
> 
> --- On Wed, 7/1/09, Ollie <satellite1965@xxxxxxxxxxx> wrote:
> 
> > From: Ollie <satellite1965@xxxxxxxxxxx>
> > Subject: Brake Drum Question
> > To: "Mopar Club" <1962to1965mopars@xxxxxxxxxx>
> > Date: Wednesday, July 1, 2009, 3:21 PM
> > 
> > 
> > Brake Drum Application
> > 1965 Ply, B Body, Satellite
> > Drum Size 10" X 2 1/2"
> > Book is showing different drums...  rear and front.
> > Rear $35   Front $85
> > I have done complete brake jobs on 2, 1965 Satellites and I
> > see no difference in the drums. I can only expect that the
> > front drums maybe a bit thicker and have the ring to install
> > the cooling spring?
> > Help me out here..
> > Ollie
> > [Non-text portions of this message have been removed]
> > 
> > 
> > ----
> > Please address private mail -- mail of interest to only one
> > person -- directly to that person.  I.e., send
> > parts/car transactions and negotiations as well as other
> > personal messages only to the intended recipient, not to the
> > Clubhouse public address. This practice will protect your
> > privacy, reduce the total volume of mail and fine tune the
> > content signal to Mopar topic.  Thanks!
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> > 
> > 
> 
> 
> 

--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.