Re: Rear Drums/Hubs

[Dave Cornelius <lt7dave@xxxxxxxxx>]

Hey Guys,
Looks like this didn't go through the first time, so here it is again,
 
I just pulled my first set of rear tapered axle drums.  It wasn't as bad as it sounded like it was going to be.  I pulled the driver's side first and got what I expected.  When I pulled the passenger side, the drum came off without the hub.  At first I thought it was different from the other side, but it looks like they're the same - only the flange with the studs came apart from the drum and stayed with the hub on the axle.  How could this happen, you ask?  I used a gear puller that grabbed behind the edges of the drums - not the proper universal puller that pulls on the studs (that I don't have).  There doesn't appear to be any damage, but the stud hole face of the drum is a little bit bent.  I don't know if that was from me or some other previous operation.  It doesn't look serious to me - nothing looks broken.  I don't even know how those parts stay together - there are no welds or anything that indicates they shouldn't come apart.  Do
 you guys think I have a problem here - or will I be able to just slap it all back together and be on my merry way with no worries?  I also noticed some end play in the right side axle that the left side doesn't have.  Does that sound normal?
 
Thanks in advance.
 
Dave C.
'64 Belvedere

--- On Thu, 7/2/09, Dave Cornelius <lt7dave@xxxxxxxxx> wrote:


From: Dave Cornelius <lt7dave@xxxxxxxxx>
Subject: Rear Drums/Hubs
To: 1962to1965mopars@xxxxxxxxxx
Date: Thursday, July 2, 2009, 10:33 AM





--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER