Re: Garlisle

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

Thanks Jeff, I sent you an e-mail...............MO
----- Original Message ----- 
From: "Jeff Adams" <ledman_70@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, July 08, 2009 6:22 AM
Subject: RE: Garlisle


> Steve, I have emailed you several times, but apparently I'm not getting
> thru. I have an extra fork from the conversion to 4-speed I did on my 64
> Polara. I can get you pics if you want. Email me off-list.
>
> Steve Mick wrote:
> >  I made a mistake on the clutch fork I need. Instead of 10-1/2 inches
> > overall length, it is 10-7/8 inches long. Some others have a slight
> > curve,
> > but this one is a very noticable bend to the back.  I can send an email
> > with
> > pic showing the correct one.  Thanks for any
> > help..........................MO..........sw  iowa
> > ----- Original Message ----- 
> > From: "MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>
> > To: <1962to1965mopars@xxxxxxxxxx>
> > Sent: Monday, July 06, 2009 5:51 PM
> > Subject: Garlisle
> >
> >
> > >
> > > I am unable to go, but there are a couple of small items that I need 
> > > and
> > >
> > > would pay a bounty for if you are there and come accross them
> > > #1  a clutch fork for 1962-1965 B body big block.. Most others are 
> > > about
> > >
> > > 12 inches long and the arm is nearly straight. The one I need is about
> > > 10
> > > 1/2 inches long  and unlike others that length, it has a bend to the
> > > back
> > > which is quite noticable.
> > >
> > > #2 For a 1964 Dodge ( not 880) , I need the left and right headlight C
> > > rings that go on the leading edge of the fenders . ( there is a
> > > difference
> > > between the left and the right) They don't need to be flawless, but in
> > > good driver condition.
> > >
> > > If you find these parts, add on your profit  and give me a call - I 
> > > will
> > >
> > > let you know if to go ahead and get them  And I wil;l pay what the
> > > shipping comes to.  Steve Mick cell- 712-542-9062....home- 712 523-2272
> > > I don't have much but my Honor, so I can provide references
> > > LOL.......................MO..............sw  iowa
> > >
> > > ----
> > > Please address private mail -- mail of interest to only one person --
> > > directly to that person.  I.e., send parts/car transactions and
> > > negotiations as well as other personal messages only to the intended
> > > recipient, not to the Clubhouse public address. This practice will
> > > protect
> > > your privacy, reduce the total volume of mail and fine tune the content
> > > signal to Mopar topic.  Thanks!
> > >
> > > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > >
> > >
> > >
>
>
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.