Re: Paint Guns/Ollie's Ramblings

[neal zimmerman <neal.zimmerman@xxxxxxxxx>]

nice dart, looks cool in the snow, no pun intended.
   neal zimmerman, eugene oregon

On 7/9/09, Jeff Adams <ledman_70@xxxxxxxxxxx> wrote:
>
> You have the right idea Neal. I painted the Dart in my garage and made a
> temporary paint boot by stapling clear plastic from Home-Depot to the
> ceiling and to 2x4's on the floor so it wouldn't drift, and overlapped
> it in a couple places for a door. Used and old box fan with 2 furnace
> filters taped to each side to move air. I did this in central Ohio in
> Febuary. No overspay on anything outside the booth, and it turned out
> pretty good for a first paint job. Here's some pics of the Dart.
> http://s114.photobucket.com/albums/n273/Ledman_70/Dart/
> neal zimmerman wrote:
>>
>> I just completed an extensive DRY air system, running big pipes ,
>> moisture drain valves, moisture trap , etc. The pipes run way up into
>> the rafters of the barn and then back down.  I did it on the cheap as
>> the  pipe was laying around and i sweet talked the guy at HomeDepot
>> into threading it on their machine since it was the  4th of July, and
>> they were slow, so he had time.  I just told him I would buy every
>> thing else i needed for the project from them.  All told it cost me
>> about 100 bucks in elbows, couplers,reducers etc. already had the
>> moisture trap and draincocks though.
>>   The point of this is , that I am gonna do my first paint job in
>> about 15 years.  just cant afford the  5000 dollar two year paint
>> jobs. screw it , heard too many horror stories.  My buddies '76
>> camaro has been in a  "shop" for about 18 months now , with hardly any
>> progress.
>>    Shot a few cars with acrylic enamel with my dad when younger, the
>> last was a VW beetle in about 1993.  The looked OK.  I bet I could do
>> better now.
>>   I am gonna  fashion a  make shift booth in the barn here.
>>    I paint houses for a living so I am  comfortable with a spray gun,
>> shooting oil enamels and lacquers for interior work. and lots of
>> exteriors in acrylic.  so I feel I have the basics of how to keep the
>> gun moving perpendicular and even to the work.  the auto finishes are
>> a little thinner when mixed with reducer, but not much more than we
>> mix our Benjamin Moore alkyd  enamels, they are pretty runny after
>> dumping a bunch of thinner and conditioner in them. runs right off the
>> stick.
>>    so we'll see how it all turns out.
>>  I am gonna go with a mid range ( 350 dollar) HVLP gun.  The shop had
>> a SATA 3000 HVLP gun for 789.00 bucks, geez.
>>   for primer guns I am just gonna use some old siphon guns I have
>> picked up at various garage sales at abou 5.00 each. clean em up, and
>> use em again for primer.  who cares about the primer, youre gonna sand
>>  most of it back off anyway.
>>     cant decide on acrylic enamel or  the base/clear approach.  still
>> thinking about that.  My first victim will be my 64 cuda, poor thing
>>   neal zimmerman, eugene oregon
>
>
>
> Jeff Adams
> 64 Polara
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and negotiations
> as well as other personal messages only to the intended recipient, not to
> the Clubhouse public address. This practice will protect your privacy,
> reduce the total volume of mail and fine tune the content signal to Mopar
> topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.