Re: Seat belts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Seat belts




There's a company called Ssnake-Oyl that will restore your seat belts but they ain't cheap.

http://www.ssnake-oyl.com/

Dan



----- Original Message ----- From: <mikelj@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, April 07, 2009 2:51 PM
Subject: Seat belts





I have to give up on all the vendors on the website for seatbelts. They keep sending me the wrong belts for the '64 Dodge, even when I tell them the mounting anchor hole size I need. These belts are all some manufacturer named "Beams" that has a tiny 3/8" or 1/2" mounting anchor hole for like a Toyota would use. My originals are big 1" socket size bolts with a shaft at least 3/4 ". Does anyone know of anyone who makes the proper size? I'm sure they can't be drilled out, as they look as hard as the lugbolts I spent a day drilling off. Thanks.

Mike in New Mexico


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network