Redneck Radios

[Dooner <doonerfunderburk@xxxxxxxxx>]

I just received an email asking what I meant by rednecking your radio 
(see below signature). Well, for those who didn't catch it when it was 
added to the restoration page of the 62 to 65 Mopar website, I will post 
this.

REDNECK RADIOS: I convert your stock AM shaft style radio to AM/FM/AUX 
Input. ($150 or less). It is a lower priced alternative to the big boys 
out there.($350-$450) 
    You will end up with the AM radio stock look, but with all new 
electronics inside. It will have two standard speaker output at about 
10-15 watts each (L, R suggested use for two small speakers in dash 
center stock location), two RCA preamp outputs (L, R suggested use to 
the rear speakers with added small wattage amp), amp remote power on, 
bass boost, stereo/mono switch, and AUX input for CD player or MP3 
player (Ipod). 
    Some modifications have to be made to small cases and to stock radio 
knobs. The only thing you loose in this type of conversion, are all the 
preset buttons. Three of them become buttons for other uses. 


You can go here anytime to see it. Look in the electrical section.

http://www.1962to1965mopar.ornocar.com/restoration-sources.html

Dooner
'64 Plymouth Belvedere 4dr Sedan
Poly 318 + Push Button Auto Trans

Contact me to redneck your radio.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.