Re: pedal to metal miss?

[Jeff <chargr1969@xxxxxxxxx>]

check timing, pull the plugs and see what color the plugs are. they should be tan. if black, it's too rich, the carb might need adjusted. if vacuum advance is hooked up may not be working. 






--- On Sat, 4/24/10, Gary H. <spigot2039@xxxxxxxxxxx> wrote:

> From: Gary H. <spigot2039@xxxxxxxxxxx>
> Subject: pedal to metal miss?
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Saturday, April 24, 2010, 11:43 AM
> 
> 
> Any thoughts on the likely culprit for a constant engine
> miss when the gas pedal is to the floor? The stumble happens
> if you floor the gas pedal to access passing gear, as well
> as from dead stop. The car (318 poly - automatic) starts
> right up and has smooth acceleration at normal part-throttle
> gas pedal positions.
> 
> Thanks,
> Gary H.
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> 
> 
>