Re: Rim/tire width
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Rim/tire width



Rule of thumb I learned years ago Jeff was the wheel should be 70% the width of 
the tire. 7" wheel...10" tire.
 
George



----- Original Message ----
From: Jeff Adams <ledman_70@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Sat, July 24, 2010 10:59:06 AM
Subject: Rim/tire width


I just got a new set of those Halibrand copies from Jegs yesterday, but 
I don't like the fact that the front and rear rims look like the same 
offset, even though the fronts are 7" and the rears are 8". What I'd 
like to know is if anyone has ever mounted a 275/60/15 tire on a 10" 
wide wheel? If so, how much tire bulge was there? Right now those tires 
are mounted on a pair of 8.5" Torguethrusts and they bulge 1" at the 
face and rear.

Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly 
to that person.  I.e., send parts/car transactions and negotiations as well as 
other personal messages only to the intended recipient, not to the Clubhouse 
public address. This practice will protect your privacy, reduce the total volume 
of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and 
http://www.1962to196----------------------------





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.