Re: hard start /carb issues

[beth <dickens@xxxxxxxxxxxxx>]

I've been following the issue of poor starting as my /6 is the same. Here is what i have tryed. 1 vaccum check on all lines.
 2nd 3 different brand new fuel pumps.
3rd 4different ignition setups.
4th Clear stand pipe at fuel inlet to carb
 Conclusion, none of the pumps will hold todays fuel in the line.
 The valves just won't hold fuel,with a clear line acting as a stand pipe they just let run back to lowest point.
Ever notice that if you park a certain way it starts better after sitting.
Only solutions are, electric pump,one,  one way check valve  , or electric shut off valve in line.
I'm about to find a 12 volt valve and use that ,works as anti theft too.  

   Doug B.  Canada
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.