Re: '64 Chrysler Questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: '64 Chrysler Questions



${top_text_ad}
Bruce,

Welcome and best of luck with your long distance resto!!!

I'm not a C-Body aficionado by any stretch, but I did have a friend
with a 70 Fury Conv. When he bought the car it had "urbanized" boofer
wheels on it. It looked like it belonged in a bad rap video and it
rode like a beet wagon. He swapped them for 15x8 Magnum 500's w/
275/60/15's (4.5" backspace)  on the rear and it made a 1000%
difference!!! It rode SOOOOOOO much better. It also looked one hell of
alot better too!!! Just my $0.02.

If you want a larger wheel, you may want to consider an American
Racing "Torque Thrust" style, or they are making billet "Mopar Rallye"
& "Magnum 500" looking wheels that might not be too bad.

We have some friends that finished a 3 year stint in Bejing working
for the US Consolate about 1 year ago. They said the liked the
area...hope you do too.

Bill M
65 Coronet 500 'vert http://1962to1965mopar.ornocar.com/mmo62008.html
73 Dart Sport, 00 Cherokee Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
21 Model T Depot Hack, 92 Accord, 06 Mazda 3

On Mon, Dec 6, 2010 at 9:52 AM, bruce buntain <bbuntain@xxxxxxxxxxx> wrote:
>
> Greetings to all those afflicted with Mopar Madness,
>
> I'm hoping that I'm doing something right here - namely getting in contact with other Mopar fans through this e-address. I just stumbled on the '62 to '65 Mopar site while surfing the internet for information, so this is the first time I've used the site to send an e-mail. I trust that I have the right e-address and others can read this (I did 'sign up').
>
> I recently bought a 1-owner 1964 Chrysler with 64,000 miles on the odo. The car is a 2-door hardtop 300 (non-letter) Silver Series. The car was originally purchased new in South Dakota, although I bought it from Indiana, from the original owner's grand daughter. The car was complete, stock, and in running condition, although it had been sitting in a garage for several years, just being started and run up and down the driveway a few times a year. While there are no rust issues, the car still wore the original paint and had a few dings and dents.
>
> The car is now in Nova Scotia, Canada, where my home is. Unfortunately, there are very few of these C-body cars of this vintage in this 'outatheway' corner of the world, and no suppliers of resto parts. The car is now in a friend's autobody shop, being stripped down to bare metal and having the dings and dents removed before being suited up with a new pair of clothes, using original color codes in a non-stock, 2-tone color scheme.
>
> I intend to use the car as a 'driver' and will not restore it to absolute stock, but changes will mostly be confined to 'upgrades' rather than modifications. While the car is in the body shop, I am trying to source the parts and pieces that I want or need for the car. Unfortunately, what is making this a little harder is the fact that I am currently working in Beijing, China, so everything has to be sourced by e-mail, and this compounds my difficulties. I will be back in Nova Scotia for a month this winter, and for the summer, but right now, this is sort of a long-range effort with things back on the Nova Scotia end being handled for me by some friends.
>
> If anyone out there can answer a few questions for me, I would appreciate the assistance. In particular, there are two things I am currently trying to find out:
>
> 1. Where can I find headers for this car? I haven't been able to source any headers for C-bodies. While I've had a decent dual exhaust system put on it, the set of headers I did order that were supposedly for a C-body turned out to be for a B-body. I had to get the shop to install the pipes to the stock exhaust manifolds, but would like, at some point, to be able to put headers on the stock 383 engine. Anyone got any ideas about where I can find headers for "Walter"?
> 2. I want to put alloy rims on the car, preferably 17" or 18" rims with a diameter of 7", 8" or 9" (I'm flexible on the exact sizing). My problem is that from Beijing, I am unable to judge what might fit and what won't. I gather from past (long past) experience with older rear-wheel cars that I will likely need something around 0 degrees offset, but most rims I have looked at on the net (and some that my friends have found and tried for fit) have too much positive offset. I could go with vintage style 15" rims from American Racing or similar, but would prefer a larger diameter as above. My question here is: does anyone know what the required offset and/or back spacing would be to fit the aftermarket rims on without getting contact on body or suspension? I know the bolt pattern and certerbore size, but not offset/backspacing, especially for the larger diameter rims. Even a close estimate would be appreciated.
> 3. Finally, I will need, at some point in time, information on front disc-brake conversion kits, a source for a passenger side external rear-view mirror (which I gather, from what I've seen from pics of these cars, must have been a rather rare option), and dash pads. My dash pad is not ripped, but is warped in two places.
>
> Of course, any and all information concerning parts and pieces, resto information and general information on the car would be appreciated. I am sort of hoping to be able to locate and order at least the rims before I get back to Nova Scotia this winter so they can be installed before I return once again in the summer. By the way, can I attach pictures with my e-mails on this site?
>
> Anyway, if anyone knows anything that might be of help, it would be greatly appreciated. I guess you could reply through the topica site, or you could e-mail me directly at: bbuntain@xxxxxxxxxxx
>
> Keep the revs up and the wheels down,
>
> Bruce Buntain

${bottom_text_ad}
----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.

This email was sent to: ${recipient}

u/?bUrDWg.${encoded_sub_id}.${EMC}








Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.