Re: Big Block Engine Dolly
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Big Block Engine Dolly




My apologies fellas,
I also left out some details: allow 9" clearance between 1'-10 5/8" pieces. Oil filter clearance notch is 1 1/2" deep and 3 1/2" long. Cost is approximately $30.00. Assembly time is about one hour. Sorry about 3 messages to get this out!
Mike LeFevre






On 4/15/2011 9:43 AM, Mike & Deb wrote:
OPPS! I forgot to list dimensions.
2-2x6x1'-10 5/8"
2-2x6x1'-6"
2-2x4x2'-1 5/8"
2-swivel caster-150#
2-rigid caster-150#
24-3"wood screw
16-1 1/2" wood screw





On 4/15/2011 8:54 AM, Mike & Deb wrote:
Hi fellas,
I thought some of you could use this dolly design I came up with. I have several and they work fine. Leave the casters off for engine transport.
Mike LeFevre



----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.