Re: How do I get the front cylinders out?

[Eric R <hoodoovoodooray@xxxxxxxxx>]

Hi, thanks for all the response!  Yes, there are ears on the cylinders
that can not slide past the plate without removing it.  I guess I have
the total contact and it appears to be the "brake shoe plate".  I
don't see how to get the brake shoe plate loose.

On Oct 10, 1:36 pm, "Gary H." <62to65mo...@xxxxxxxxxxx> wrote:
> Did you have the 2 cylinders per wheel style?
>
> Thanks,
> Gary H.
>
>
>
> >  -------Original Message-------
> >  I had to remove the backing plate on my '62 880, the cylinders have
> >  ears on them that get pinched in there and its impossible to remove it
> >  without removing everything.
>
> >  - Dave- Hide quoted text -
>
> - Show quoted text -

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.