Re: Pushbutton Selector Leak at Trans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pushbutton Selector Leak at Trans



This is a link to a 1964 bulletin on Automatic Transmission Shift Cable Removal, Installation and/or Adjustment.

Is 1962 the same or similar? 

http://1962to1965mopar.ornocar.com/trannycableservicebulletin.html

Thanks,
Gary H. 


>  -------Original Message------- 
>  
>  Eric,
>  You need to replace the O-ring. You must remove the cable from the trans to
>  do this. I can explain the proceedure to you but, a service manual would be
>  better.
>  Mike LeFevre
>  
>  
>  On Jan 11, 2012, Eric R   wrote:
>  Looks like tranny is leaking where selector cable goes in.
>  
>  All I google is advice on non push button trannys.
>  
>  Anyone know how to fix this leak. I've read that non push button
>  727's the selector housing might need replaced, other say it's an o-
>  ring.
>  
>  Thanks 

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.