Re: Water pump annoyance
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Water pump annoyance



Can I use 3 washers to get enough clearance? Will that effect anything? I checked it out everything matches up just the mounting piece is thinner. Instead of getting new bolts I have some washers I could use but I didn't know if that would hurt anything 

Sent from my iPhone

On Jan 24, 2012, at 14:48, "Daniel McCormack" <mcwheels@xxxxxxxxxxxxxx> wrote:

> Did you forget to put the fan spacer back in?
> 
> 
> -----Original Message-----
> From: 1962to1965mopars@xxxxxxxxxxxxxxxx
> [mailto:1962to1965mopars@xxxxxxxxxxxxxxxx] On Behalf Of Jacob Fox
> Sent: Tuesday, January 24, 2012 7:49 AM
> To: 1962 to 1965 Mopar
> Subject: Water pump annoyance
> 
> So I changed my pump yesterday. After getting it all back together and
> putting the fan on, the bolts for the fan are now to long, and hit the
> housing where bearing is. I had the original water pump on the car, and I
> got a brand new one from advance auto. Just in case someone else is gonna
> change their pump to one from here. 
> 
> Sent from my iPhone
> 
> -- 
> --
> Please address private mail -- mail of interest to only one person --
> directly to that person. That is, send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> -- 
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.
> 
> -- 
> --
> Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> -- 
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> http://groups.google.com/group/1962to1965mopars?hl=en.

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.