Poly to Big Block swap Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Poly to Big Block swap Question



Hi folks,

I have been working on the wiring for my wife's 64 Polara 500 ragtop
that originally had a 313 and will have a 383.

My question is: does the coil wire in the engine wiring harness stay
the same or does it get lengthened?  I do not have the engine near the
car and do not know where the coil sits on the intake as compared to
the small block.

Thanks for your help.

Regards,

Kevin Merkley
Thunder Bay, Ontario Canada

-- 
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.