Re: mbmbreaks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: mbmbreaks



Yes minimal firewall cutting, Master Power Brakes included an arm assortment with the kit, just picked the one that worked.  My problem was every booster we tried had a different bolt pattern and after four tries the firewall looked like a ST. Louis drive by scene. (;   So I just replaced the support plate that luckily covered up all the holes.
 
 
 
 
-------Original Message-------
 
From: Gary H.
Date: 1/28/2012 6:32:03 PM
Subject: Re: mbmbreaks
 
Did you need to alter / cut the fire wall out using that kit?
 
Thanks,
Gary H.
 
>  -------Original Message-------
>  From: Herb
... I had to replace the brake
>  support plate that sandwiches the outside of the firewall to cover up the
>  plethora of holes.  Before you go through it all your self, check your hood
>  / master cylinder clearance using there bracket.
>  Here is a photo of what I ended up doing.     Using a unit with out the
>  bracket.
 
--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
 

--
--
Please address private mail -- mail of interest to only one person -- directly to that person. That is, send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.