Re: Radiator fan
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Radiator fan



 Paul, no, not useing any spacer. Maybe surpriseing , but the thermo
fan clutch and fan are thicker than the spacer. I  wonder what the
factory used with a stock 3 core radiator. Maybe that was not
available with a fan clutch? Maybe they used a different center offset
in the fan cause it is the blades that keeep me from using the one I
have for a two core.........................MO

On Feb 15, 5:54 pm, "Paul L.   http://1962to1965mopar.ornocar.org/ml-lennemann63.html";
<pjl...@xxxxxxxxx> wrote:
> Steve, are you using the spacer?  I so, could you get a machinist to
> shorten it enough to gain the needed clearance.
>
> Paul L.
>
>
>
> On Friday, February 15, 2013 12:48:55 AM UTC-6, MO wrote:
>
> > Got my new 3 core radiator  mounted in my 64 Dodge B body.  I tried
> > to installl my 7 blade  fan and  thermo clutch, but lacked about 1/4'
> > of haveing enough room between the core and water pump. I would like
> > to use some type of fan that will move a lot of air and not drag when
> > getting on the loud pedal . Don't want to use electric.. What is your
> > set-up?...............MO- Hide quoted text -
>
> - Show quoted text -

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.