Re: Thinking of Adding Aftermarket Guages

["Dennis C." <dennis.2914@xxxxxxxxx>]

If I understand it correctly the sensor is now at the end of a pipe
that is about 3" long.  If that is true I doubt that you will get an
accurate temperature reading, I suspect that it will read low.

What brand of gauges are you using?

Sorry, I came in late to this:

Does the dash currently have a gauge or a light and are you keeping it
operational?

What engine do you have in the car?

Again, sorry for coming in late but it would seem that there should be
a better solution than having the sensor on a long pipe.

Take Care
Dennis C.


On Feb 28, 11:03 pm, Timothy  Arnold <timn...@xxxxxxxxx> wrote:
> I got my gauges today, upon looking at the water temp sensor I notice it's
> a lot bigger than the stock.  I went my local hardware & the fitting for
> the sensor is 1/2" the hole in the manifold is 1/8".  The guy there helped
> me rig a fitting from 1/8 up to 1/2", Problem is it's rather large approx
> 3" long.   If anyone has done there's like this could you shoot me a
> picture or if you remember give me what parts you used?
>
> Thanks!
> Tim

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.

--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.