Re: Voltages in a 64 Polara
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Voltages in a 64 Polara



Absolutely not taken as a shot!  Especially with all the frustration your going through!  Another thing to double check are grounds, block/tranny to frame, and block to firewall, will save your shifter cables down the road also.  If it was recently painted using a large drill bit by hand clean some paint from around the mounting holes in the firewall.
 
H
 
 
-------Original Message-------
 
Date: 6/3/2013 9:23:28 PM
Subject: Re: Voltages in a 64 Polara
 
Herb, please don't take this as a shot at you(i know you meant that as a gentle jab) but I'm not looking for more ways to spend money, just to get what I already have working.
I know a lot of guys love the Pertronix setups, but I don't. I know several people locally that have them and it seems 50/50 as far as results. Half have no trouble and half have no thing but.
I prefer the Mopar setup mainly because replacement parts are usually at any parts store. This the first car out of literally dozens that has given me these kind of fits.

Mark


From: "Herb" <zephyr9900@xxxxxxxxxxx>
To: "1962to1965mopars" <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Monday, June 3, 2013 10:08:49 PM
Subject: Re: Voltages in a 64 Polara

1 word!........Pertronix.  (; 
 
 
 
 
-------Original Message-------
 
Date: 6/3/2013 6:14:29 PM
Subject: Voltages in a 64 Polara
 
Group,

I'm having some kind of electrical issue with my 64 Polara convertible(again). I'm looking for some kind of reference that will tell me what voltages I should have at each connection in the bulkhead connector and the engine wiring with Mopar electronic ignition.
It has a brand new coil, ignition box x3(2 used & a new) and distributor x3(last one was straight out of the box) but won't run.
If you put a timing light on a wire, it shows inconsistent spark. Spark coming out of the coil is orange, not a hot blue.
Today, just to rule out a timing problem, like a jumped chain, I tossed in a points dizzy hot-wired to the battery. Fired up and ran fine.

Thanks for any help in advance!
Mark
 

 

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.
 
 


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.