Re: 318 Poly rocker adjusters

[furyus63@xxxxxxxxxxx]

Dan,

 

Here's a photo of the adjusters with lock nuts added to the Poly head rocker arm.

 

Nick Tiberio

FuryUs63

 

 

---

From: "mopardan65" <dbendixon@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Sent: Wednesday, July 17, 2013 12:31:58 AM
Subject: 318 Poly rocker adjusters

This just slightly off topic as the 318 poly is in my cousin's '66 Coronet, but is still relevant to any '62 to '65 poly.

I'll address this straight to the man: Gary P. , but anyone else with suggestions please chime in.

(Gary, Travis Peterson is my cousin. I was the one helping him with the build last month.)

Question: What can we do with these old loose things without tearing the engine apart to remove the heads? 

We tried some locktite on them and they'll still be loose and ticking after a 10 minute drive. They didn't seem to mind the stock cam and solid lifters, but the higher lift hydraulic cam and lifters are really working them loose... and quickly.

I imagine a new set of OEM adjusters would be an improvement, but they don't seem to be a very reliable design. I love the aftermarket rockers I've seen for these, where the entire shaft of the adjuster is threaded and has a slotted top to secure them with a screwdriver while the nut is jammed onto the rocker arm. Can those style adjusters be purchased alone and thread into the original rockers, or are they only available with the complete (and expensive) rocker set?

I've even considered trying to machine some old originals into something similar to the above mentioned.

Other than this one problem, his car is running great!

Thanks,

Dan Bendixon

-65 Dodge Monaco

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.

Attachment: RA1.JPG
Description: JPEG image