Re: '62 Newport Axle Shaft Length?

[Eric R <hoodoovoodooray@xxxxxxxxx>]

Thank you, yes thrust block is in the center section.

 

On Saturday, September 7, 2013 1:51:31 PM UTC-4, 65Val wrote:

Eric...Do you have the thrust block in the center-section?

 

Darwin/BC/Canada
--'67 Dart GT 'vert...273/904
--'65 Cdn.Valiant Custom 100 'vert...225/A833----SOLD
 http://s41.photobucket.com/albums/e285/65val

 

 

----- Original Message -----

From: Eric R

To: 1962to19...@googlegroups.com

Sent: Saturday, September 07, 2013 9:52 AM

Subject: '62 Newport Axle Shaft Length?

I'm trying to figure out why I have too much end play in my right axle.  It's about 1/8".     Does anyone know what the axle shaft measurement should be and the correct way to measure?

 

I've read a sure grip axle is 1/8"  shorter then an open diff.  I'm wondering of that's what is in there somehow.

 

I measure 26" from end of axle to the outside of the axle flange.   I measure 31 3/8" from axle end to tip of axle threads.

 

Thank you!

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopa...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.