Re: wierd thing on a a904
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: wierd thing on a a904



If you have a yoke instead of a slip yoke,this is normal.If you check on the side of the tranny case,just above the oil pan rail,there is a 17 digit code number/letters to ID the tranny.If you send me this info,I can decode the tranny to what it is,and where it came out of,you can then order parts.The bearing it,s self has a part number on it and can be cross referenced to ID  it.You can also find the transmission part number on our site to further decode the unit:(www.mymopar.com) you go to the tool reference section,and then to the chassis drivetrian section and then to the transmission part number guide,and the lists are there,mrmopartech


On Thu, Oct 24, 2013 at 3:59 AM, Roderek Soest <awesomemau5heads@xxxxxxxxx> wrote:
I have a 1965 barracuda, and on its aluminum tail housing for the a904(slant 6), in the end, it has a bearing. The thing is, the bearing is worn out and needs to be replaced. But upon looking for a replacement, i come to find out that it doesn't seem to exist. So, what kind of transmission do i have, why does it have a bearing and not a bushing, and how/where do i find the parts it needs.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit https://groups.google.com/groups/opt_out.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.