Re: Cam for my 440

[Donald Gallimore <dongallimore@xxxxxxx>]

Just to confirm the comments you are getting, it should idle better than that. I've got the next bigger cam, the Extreme Energy 228, and it will idle okay at 750-900 rpm.

 

Akron Don Gallimore

From: David Blosser <pallconservices@xxxxxxxxx>
To: 1962to1965 Mopars <1962to1965mopars@xxxxxxxxxxxxxxxx>
Sent: Monday, February 10, 2014 3:51 PM
Subject: Cam for my 440

Pulling my hair out!

I have a 440 cross ram in my 62 Belvedere making a clone 413 nostalgia  straight axle car. I finally got it running with new Edebrock E Street Alum heads and Comp 23-227-4 cam. 

Adv Dur Int 275 Exh 287

Dur @.050 231 & 237

Lift .525 .525

Lobe Sep 110.0

It runs really strong but will not idle. I was told this was a mild cam for street and strip. It will not idle at less than 1500 rpm and I have to keep a foot on the brake and one on the gas when at a stop and in gear. I put a new 2800 stall converter in it. Do any of these things sound wrong to anyone?

Being a converted mopar nut, I am really lost on how to tune this engine and my engine builder is a holley carb guy, so he is no help. I have changed the jets and metering rods and springs to no avail. 

I am just digging a hole at this point and need all the help I can get. Edelbrock said they could not help either.

David

--

David Blosser, Pres.

PallCon Pallets

239-293-4885

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.

-- 
-- 
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
 
--- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit https://groups.google.com/groups/opt_out.